| |
Newsroom /
Computer
/
Computer
/
Magma's Talus Supports TSMC 28-nm Process Reference Flow
Magma's Talus Supports TSMC 28-nm Process Reference Flow
Magma delivers new differentiated features for improved power and performance
Reading,
Berkshire,
United Kingdom
(prbd.net)
31/05/2011
SAN JOSE, Calif., May 31, 2011 - Magma® Design Automation Inc. (Nasdaq:LAVA), a provider of chip design software, today announced that Magma's Talus®, Hydra™, Tekton™, QCP™ and Quartz™ DRC integrated circuit (IC) implementation and verification solutions have been qualified to support the TSMC Reference Flow 12.0. Through TSMC's Open Innovation Platform (OIP), Magma's product suite provides users with advanced features to address the challenges of 28-nanometer (nm) design.
"Magma and TSMC have already worked closely to support the design and manufacture of a number of 28-nm ICs for the industry’s highest volume fabless companies,” said PremalBuch, general manager of Magma's Design Implementation Business Unit. "With Talus, Hydra, Tekton, QCP and Quartz DRC, and Reference Flow 12.0, mutual customers can have a high level of confidence in their ability to successfully deliver differentiated ICs using Magma and TSMC solutions."
"Close collaboration with leading EDA vendors such as Magma is critical to delivering the 28-nm design ecosystem,” said Suk Lee, director of Design Infrastructure Marketing at TSMC. “Our mutual customers’ silicon successes highlight the effectiveness of TSMC’s process technology and Talus, Hydra, Tekton and Quartz for ICs at 28 nm.”
28-nm Design Enablement
Magma's Talus RTL-to-GDSII IC Implementation system supports TSMC 28-nm design rules that have been enhanced in Reference Flow 12.0. Talus' support of Reference Flow 12.0 takes advantage of new power and performance features, providing customers with faster overall design closure and better performance and predictability. In addition, Magma's Quartz DRC and Quartz LVS physical verification tools support in-the-loop physical verification.
Improved Performance
At 28 nm and below it becomes increasingly complicated to capture the number of potential variations at all process corners. With Reference Flow 12.0, greater performance is achieved using multiple advanced stage-based on-chip variation (OCV) optimization and analysis tables instead of a single OCV value. This analysis technique is available in Tekton, Magma's standalone static timing analysis tool, and is also supported by Talus Vortex through its MX timing engine. This technique can reduce traditional OCV pessimism and improve performance by removing some of the punitive pessimism associated with traditional OCV modeling.
Reference Flow 12.0 additionally provides significant user margin control through add-on OCV that allows further modeling of voltage and temperature variation and cell-based constraint uncertainty, both of which are supported fully by Talus Vortex and Tekton.
To ensure optimal dummy fill after GDSII stream-out, Reference Flow 12.0 provides for timing criticality information to be passed through to latter stages of the flow, a technique also fully supported by Talus Vortex.
New Low-Power Features
TSMC supports both the Common Power Format (CPF) and Unified Power Format (UPF) in Reference Flow 12.0. Talus Power Pro, Magma's advanced low-power optimization technology, also supports both the CPF 1.1 and UPF 2.0 power intent standards. This provides customers with complete flexibility in defining power intent. Talus Power Pro's industry-leading multiple voltage domain (MVdd) infrastructure delivers the most comprehensive power support combined with the simplest use model. In particular, its dynamic voltage and frequency scaling (DVFS) low-power technologies, bolstered by an industry-leading multi-mode, multi-corner framework, enables customers to deliver the maximum performance per watt. These capabilities, combined with Magma's Hydra hierarchical design planner, allow customers to design very large, low-power systems on a chip without sacrificing performance.
To support Reference Flow 12.0, Talus Vortex also delivers optimized cell placement to minimize power hotspots and delivers native electromigration-safe clock placement and network topologies throughout the flow. Talus Vortex with Talus Power Pro now supports post-route multi-mode, multi-corner-aware leakage power optimization through Magma’s Tekton timing analysis tool.
Magma Support for TSMC Reference Flow 12.0
Reference Flow 12.0 is supported by Magma's full RTL-to-GDSII suite of tools, which includes:
• Talus Design – physically aware RTL synthesis
• Talus Vortex – advanced timing and DFM-aware physical implementation
• Talus Power Pro – low-power optimization
• Hydra – hierarchical design planning
• Talus qDRC – timing-aware metal fill
• Quartz DRC – design rule checking
• Tekton – static timing analysis
• QCP – sign-off-quality extraction
See Magma at DAC
To learn more about TSMC’s Reference Flow 12.0 and Magma's Talus, Hydra, Tekton, QCP and Quartz DRC, visit Magma in booth 1743, or in TSMC’s booth 2535 at the 48th Design Automation Conference, June 6-8 in the San Diego Convention Center. Magma will offer demos of its complete line of technology-leading solutions that streamline customization of high-performance core designs, facilitate implementation of large SoCs, automate analog/mixed-signal design and reuse, provide the fastest throughput and predictable closure of complex application-specific chips and enable cost-effective, highly reliable memory sub system design. For more information about Magma at DAC, visit www.magma-da.com/DAC.
About Magma
Top semiconductor makers worldwide use Magma's electronic design automation (EDA) software to produce chips for electronic applications including tablet computing devices, mobile devices such as smartphones, electronic games, digital video, networking, military/aerospace and memory. Magma products provide the "Fastest Path to Silicon"(tm)and include software for digital design, analog implementation, mixed-signal design, physical verification, circuit simulation, characterization and yield management. The company maintains headquarters in San Jose, Calif., and offices throughout North America, Europe, Japan, Asia and India. Magma's stock trades on Nasdaq under the ticker symbol LAVA. Follow Magma on Twitter at www.Twitter.com/MagmaEDAand on Facebook at www.Facebook.com/Magma. Visit Magma Design Automation on the Web at www.magma-da.com.
###
Magma and Talus are registered trademarks and “Fastest Path to Silicon,” Hydra, QCP, Quartz and Tekton are trademarks of Magma Design Automation Inc. All other product and company names are trademarks or registered trademarks of their respective companies.
Forward-looking statements:
Except for the historical information contained herein, the matters set forth in this press release including statements that combination of the TSMC Reference Flow 12.0, and Hydra, QCP, Quartz DRC, Talus and Tekton improve performance and power on 28-nm ICs, and about the features and benefits of TSMC and Magma products are forward-looking statements within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. These forward-looking statements are subject to risks and uncertainties that could cause actual results to differ materially, including but not limited to TSMC's and Magma's abilities to keep pace with rapidly changing technology and the companies’ products’ abilities to produce desired results. Further discussion of these and other potential risk factors may be found in Magma's public filings with the Securities and Exchange Commission (www.sec.gov). Magma undertakes no additional obligation to update these forward-looking statements.
Contacts:
Monica Marmie
Director, Corporate Marketing
(408) 565-7689
mmarmie[at]magma-da[dot]com
Europe PR Contact for Magma:
Lloyd Pople
lloyd[at]evokedset[dot]com
+44 (0)7714 765 607
Distributed on behalf of EvokedSet by NeonDrum news distribution service (http://www.neondrum.com)
About
NeonDrum is a targeted global online news release distribution and monitoring service for PR professionals.
Our mission is simple: to boost online coverage of your B2B press releases, help you to punch above your weight in the online channel, and get you seen, heard - and found - by the people that matter
|