| |
Newsroom /
Computer
/
Computer
/
eSilicon uses Magma to Tape Out 28-nm 1.5GHz Microprocessor Cluster for Embedded Platforms
eSilicon uses Magma to Tape Out 28-nm 1.5GHz Microprocessor Cluster for Embedded Platforms
Talus-Flow-Manager-Based Reference Flow for GLOBALFOUNDRIES' 28-nm SLP Process and Quartz’s pattern matching capability improve quality of results and accelerate turnaround time
Reading,
Berkshire,
United Kingdom
(prbd.net)
11/11/2011
SAN JOSE, Calif., Nov. 10, 2011 – Magma® Design Automation Inc. (Nasdaq: LAVA), a provider of chip design software, today announced that eSilicon Corporation, the largest independent semiconductor value chain producer (VCP), used Magma software to tape out a three-way microprocessor cluster based on MIPS’ leading-edge MIPS32® 1074Kf™ Coherent Processing System (CPS). Typical performance of the cluster is expected to be approximately 1.5GHz with worst-case performance of 1GHz. By leveraging Magma’s Talus® IC implementation platform and the Talus-Flow-Manager-Based Reference Flow for GLOBALFOUNDRIES' 28nm-SLP process technology, eSilicon was able to achieve an impressive performance goal while optimizing power consumption. The Magma Quartz™ DRC and Quartz LVS products’ support for GLOBALFOUNDRIES' DRC+ (a silicon-validated, yield-critical pattern-based design for manufacturing low) streamlined physical verification of the chip.
“Magma’s world-class support and state-of-the-art design software for advanced nodes has been a key factor over the years in enabling eSilicon to achieve fast netlist-to-GDSII cycle times and this tapeout was no different,” said Hao Nham, vice president of Engineering at eSilicon. “Magma engineers worked side-by-side with our top designers and GLOBALFOUNDRIES to customize the design flow. This dedicated support and flow flexibility made it easier for us to harden the high-performance cores and get them to run properly in a cluster and a new process technology.”
“Enabling semiconductor developers to meet the toughest power, performance, area and turnaround time targets is one of Magma’s key strengths and a particular focus for us,” said Premal Buch, general manager of Magma’s Design Implementation Business Unit. “eSilicon’s repeated success using our software demonstrates that Magma is still the technology leader for advanced IC design and highlights the results that eSilicon can deliver to users of its unique services.”
Talus and Quartz: Advanced Technology, Comprehensive Foundry Support
The tightly integrated Talus® platform provides eSilicon with an advanced IC implementation solution that addresses the myriad design challenges at the 28-nanometer (nm) node and beyond. This highly convergent implementation flow provides advanced crosstalk avoidance and correction technology, accelerating design cycles. With seamless access to the sign-off-accurate timing analysis and extraction capabilities of the Tekton™ platform engineering change order (ECO) runtimes are also minimized.
To streamline tool and process node adoption and ease flow rollout, Talus includes the Talus Flow Manager. This unique utility provides a ready-to-use, GLOBALFOUNDRIES-qualified, 28-nm netlist-to-GDSII design flow. The Talus Flow Manager also features the Talus Visual Volcano™, a technology designed to help designers make better decisions faster. The Talus-Flow-Manager-Based Reference Flow for GLOBALFOUNDRIES' 28-nm SLP process provides unique visualization capabilities that enable chip developers to quickly and easily import an existing design, then analyze and evaluate its performance in the 28nm-SLP process. With this unique reference flow mutual Magma and GLOBALFOUNDRIES customers can better evaluate the benefits of moving to the 28-nm node.
In addition, the Talus Flow Manager easily integrates with Magma's Quartz DRC and Quartz LVS physical verification products. The Quartz products’ support for GLOBALFOUNDRIES’ DRC+ flow allows chip developers such as eSilicon to significantly accelerate the identification of 2-dimensional (2D) yield detractors and complex manufacturing issues with comparable accuracy to full-chip lithography process simulations. Tight integration of Quartz DRC and Quartz LVS with Magma's Talus platform fully automates fixing and enables fast and easy deployment of an efficient and convergent analyze-and-repair methodology.
About Magma
Leading semiconductor companies worldwide use Magma’s electronic design automation (EDA) software to produce chips for a wide variety of vertical markets including tablet computing, mobile devices, electronic games, digital video, networking, military/aerospace and memory. Silicon One, Magma’s technology solutions for emerging silicon, address time to market, product differentiation, cost and performance while making silicon more profitable. Magma products include software for digital design, analog implementation, mixed-signal design, physical verification, circuit simulation, characterization and yield management. The company maintains headquarters in San Jose, Calif., and offices throughout North America, Europe, Japan, Asia and India. Magma’s stock trades on Nasdaq under the ticker symbol LAVA. Follow Magma on Twitter at www.Twitter.com/MagmaEDA and on Facebook at www.Facebook.com/Magma. Visit Magma Design Automation on the Web at www.magma-da.com
###
Magma and Talus are registered trademarks, and Flow Manager, Quartz, Tekton and Visual Volcano are trademarks of Magma Design Automation Inc. All other product and company names are trademarks or registered trademarks of their respective companies.
Forward-Looking Statements:
Except for the historical information contained herein, the matters set forth in this press release, including statements that Quartz, Talus, and Tekton improve quality of results and accelerate turnaround time for designs manufactured with GLOBALFOUNDRIES' 28-nm SLP process, that eSilicon’s microprocessor will perform at 1.5GHz, and statements about the features and benefits of eSilicon’s, GLOBALFOUNDRIES and Magma products, are forward-looking statements within the meaning of the "safe harbor" provisions of the Private Securities Litigation Reform Act of 1995.These forward-looking statements are subject to risks and uncertainties that could cause actual results to differ materially including, but not limited to the companies’ abilities to keep pace with rapidly changing technology and their products’ abilities to produce desired results. Further discussion of these and other potential risk factors may be found in Magma's public filings with the Securities and Exchange Commission (www.sec.gov). Magma undertakes no additional obligation to update these forward-looking statements.
CONTACTS:
Magma Design Automation Inc.
Press Relations
Monica Marmie
Director, Corporate Marketing
(408) 565-7689
mmarmie[at]magma-da[dot]com
Nicky Denovan
Magma Press Relations, Europe
EvokedSet
Tel: +44 7747 017654
Email: nicky[at]evokedset[dot]com
Distributed on behalf of EvokedSet by NeonDrum news distribution service (http://www.neondrum.com)
About
NeonDrum is a targeted global online news release distribution and monitoring service for PR professionals.
Our mission is simple: to boost online coverage of your B2B press releases, help you to punch above your weight in the online channel, and get you seen, heard - and found - by the people that matter
|